General industrial machines use shaft collars as mechanical stops and locating parts around conveyors, packaging equipment, assembly stations and custom automation. The EP-SCS range includes several intermediate metric bores that can be useful when the machine does not use only round-number shaft sizes.
Replacement work should begin with measurements rather than assumptions from the equipment name. Compare bore, outside diameter, body width, screw access and nearby shoulders or bearings, then note the operating environment if contamination, washdown or corrosion exposure could affect the requested material or finish.
Where the Collar Can Be Used
| Use | Buyer Check |
|---|---|
| Conveyor/packaging stop | Check moving product hardware and guard clearance. |
| Assembly equipment | Define the position reference and whether adjustment is expected. |
| MRO replacement | Photograph the old part and measure the shaft at the installed location. |
| Custom machinery | Add a simple drawing showing adjacent components and the required axial position. |
Why a Single-Split Collar Is Practical
On packaging, conveying and custom machinery, a split shaft collar is a practical choice when maintenance teams need a mechanical stop or axial reference that can be removed and reset. The clamp arrangement also makes it easier to inspect and reposition the collar during an MRO intervention.
Industrial replacement work should be dimension-led. Compare the measured bore with the old collar OD and width, then check screw access, nearby shoulders, bearings, guards and the operating environment before selecting a replacement model.
Recommended Selection Path
| Step | Buyer Check |
|---|---|
| 1 | Measure the shaft at the intended collar position. |
| 2 | Choose the matching EP-SCS bore and compare outside diameter/width with the available envelope. |
| 3 | Confirm the clamp screw can be reached in the assembled machine. |
| 4 | State any keyway, non-standard bore, impact or environmental requirement. |
| 5 | Send a drawing/photo when the surrounding machine makes the fit difficult to explain in text. |
RFQ Information for Industrial Machinery
For industrial machinery enquiries, provide the shaft diameter, old collar OD/width when replacing a part, preferred EP-SCS model and quantity. Add a clear installation photo plus any contamination, washdown, corrosion or repeated-impact condition that affects the requested configuration.