China supplier CH430 Cone Crusher Spider Bushing 442.6473 eccentric collar shaft lock

Product Description

Product Description

Premium Parts to Fit CH/CS Cone Crusher
Powerups has been specializing in manufacturing premium quality CZPT wear and replacement parts since 1990s, providing more competitive parts and service than typical parts suppliers in the world. In most of cases, we have the parts on shelf or castings in stock, which effectively shortens the lead time. We supply premium quality wear parts and spare parts such as bottom shell, concave, mantle, eccentric, eccentric bushing, head, etc. to cover the models of CH420 cone crusher, CH430 cone crusher, CH440 cone crusher, CH660 cone crusher, CH870 cone crusher, CS420 cone crusher, CS430 cone crusher, CS440 cone crusher, etc. In addition, CZPT offers full line of quality parts CZPT to cover Symons cone crusher, Gyradisc cone crusher, GP Series cone crusher, C Series jaw crusher, MP Series cone crusher, Omnicone Series cone crusher , HP Series cone crusher.

Detailed Photos

  1. Top shell
  2. Arm shield
  3. Retaining bolts & washers
  4. Concave support ring
  5. Spider cap
  6. Spider bushing

  1. Piston wear plate
  2. Mainshaft step plate
  3. Step washer


  1. Hydroset piston
  2. Chevron packing
  3. Hydroset seal


  1. Head
  2. Mainshaft
  3. Dust seal retainer
  4. Headnut
  5. Dust seal ring
  6. Inner headnut
  7. Mainshaft sleeve
  8. Dust collar


  1. Eccentric
  2. Gear
  3. Retainer
  4. Eccentric wear plate
  5. Eccentric bushing

  1. Pinion shaft housing
  2. Pinion shaft
  3. Pinion
  4. Sheave end bearing
  5. Pinion end bearing


  1. Bottom shell
  2. Bottom shell bushing


Examine This Report On spider bushing gyratory crusher

Styles within the updated Kubria cone crusher line may be equipped with the Kubriamatic Regulate system choice, which monitors hole width, output and force together with temperatures and oil circulation.
The internal area of the eccentric bushing is machined off-centre from your centre-axis on the crusher. As being the eccentric bushing rotates, the lessen shaft oscillates in an elliptical orbit round the centreline with the crusher.
Sustainability major Sustainability implies that we do points efficiently and responsibly regarding the environment, folks as well as economic climate.
When folks photo Hong Kong, it’s Yau Tsim Mong That always comes to thoughts. This is where you’ll uncover neon-drenched streets, packed night time marketplaces and an infinite level of browsing.
This isn’t the fault of the crusher alone or the companies that Establish these remarkably efficient devices. Crushers, when properly sized for the appliance and perfectly preserved, can handle most-Otherwise all-of the fabric dumped into them with very little outdoors guidance.
Sealing out Filth and mud and their devices-destroying CZPT motion leads to evident maintenance economies. The kind of dust seal Utilized in the gyratory crusher is easily the most dependable and efficient gadget at any time formulated for blocking excessive wear due to Dust and dust.
Until just lately, there has been no strategy for accurately figuring out the ability demanded for any supplied crushing Procedure. With little or no factual running details correlated into helpful sort, it absolutely was tough even for by far the most experienced operators to arrive at an accurate sizing crusher or a correct measurement crusher motor to carry out a provided career.
Thus it’s practicable to utilize close-grained CZPT iron, and Unique superior-examination mixtures of cast iron, for these sections, In case the machine is meant for crushing soft or medium elements. When really hard and hard components are being crushed, the machine is frequently strengthened by substituting cast metal in 1 or more of its sections.
The ore enters the upper section of your crusher earlier the spider assembly which supports and properties the upper main shaft bearing.
Welcome to Thomas Insights daily, we publish the latest news and Assessment to keep our readers updated on what’s going on in marketplace. Register below to get the working day’s leading stories delivered straight for your inbox.
In the gyratory crusher, high priced castings are safeguarded by replaceable components. Rim and arm liners secure the spider from don.
The motion in the gyratory crusher, and of another member from the reciprocating tension family, the jaw crusher, is essentially a straightforward 1 particular, but as is going to be witnessed a substantial amount of considered and many quite progressive engineering has become expended CZPT the design of crushing chambers to improve capacities and to permit the use of closer discharge settings for secondary and great-reduction crushing (many crusher styles).
The “F/M signifies that crushers of this kind are utilized for fantastic and medium crushing; i.e., largely as secondary and tertiary crushers. Dependant CZPT needs, the F/M 90 can be equipped with a feed opening of 180 mm and can achieve throughputs of nearly 2 hundred mt/h.
The underside shell is the muse of your crusher. It need to be CZPT CZPT not just to assistance the weight of the crusher, but to face up to Extraordinary crushing stresses (most stresses terminate below) sturdy adequate to protect vital system the eccentric, gears and countershaft assembly housed in the bottom shell.

Ch430 cone crusher Things To Know Before You Buy
Items Cellular and stationary models, crops and automation alternatives for aggregates production. Perspective goods
The electrical dump valve process shields your crusher from unwanted force peaks considerably improving CZPT its general performance and dependability
The crusher provides a hydraulically supported primary shaft which is supported at both equally ends. With a robust structure, adjustable eccentric throw, a continuing ingestion opening, they offer output overall flexibility and according to crushing application, they accomplish nearly 30% better when compared to other crushers of their class.
Removes DIAPHRAGM Within a gyratory crusher by using a aspect discharge, sticky elements might pack about the diaphragm and finally bring about sizeable damage. The straight down discharge from the Gyratory crusher is really a layout simplification that gets rid of the diaphragm and its servicing complications.
A crusher location of 5 in. to the open up facet is wanted due to following gear and the requirements for stone.
Mining Supporting your functions, from plant layout skills to tools, elements and solutions for every phase of your respective approach. Investigate
The footprint of the new crusher is similar to the outdated 1 particular, so there isn’t a should redo any civil or electrical engineering do the job or change the feeder and conveyor preparations. CZPT Reborn is definitely an effective “plug and Perform” installation that minimizes disruption and maximizes productivity.
Crusher capacities usually do not fluctuate considerably While using the impact strength. There exists a ability enhance of a lot less than ten% from the toughest to the softest stone, in which packing will not be an element.
One of the crusher’s reliability and relieve-of-maintenance options, Telsmith noted the T9 M2/W502 CH430 /CS430 9 CH430 /CS430 900.5716-00 PROTECTION CAP CH430 /CS430 900.571-00 SLEEVE CH430 /CS430 900.0425-00 PIPE COUPLING  CH430 /CS430 900. 0571 -00 FILTER PLUG G 1/4 F14 CH430 /CS430 900.0921-00 TEE ADAPTER G 3/4 B x G 3/4 CH430 /CS430 900.0981-00 PLUG BSPT 1 INX CH430 /CS430 900.1030-00 REDUCER RI-08-04 1/2″-1/4 (FOR S-MODEL) CH430 /CS430 900.1412-00 PIPE 3/4 X 70 CH430 /CS430 900.2008-00 ELBOW 45 DEG SMS 453-10 (FOR S-MODEL) CH430 /CS430 902.0605-00 VALVE AIR BLEEDER UV 121 CH430 /CS430 902. 0571 -00 VALVE R1 0,7MPA” CH430 /CS430 906.0140-00 PUMP TGL047-02V (RB5 CH430 /CS430 906.5718-00 FAN WHEEL 650/7-14/35/PPG/3HL/24 CH430 /CS430 906.0307-00 FAN BLADE 650/14-14/35/PPG/3HL CH430 /CS430 442.2873-90 WATER COOLER BCF 502-0-4 CH430 /CS430 910.0055-90 AIR-OIL COOLER 58-650-41-1.5 CH430 /CS430 910.0063-00 COOLER CELL ¬†IE-3083 CH430 /CS430 912.0096-00 DUST RMVR DIRT TRAP SW/0 1 1/4 INCH CH430 /CS430 912.0114-00 BREATHER  CH430 /CS430 912.0155-00 FILTER ELEMENT 852.514 MIC CH430 /CS430 914.0093-00 NIPPLE, LUBRICATING AH KR1/4 CH430 /CS430 919.0164-00 PRESSURE ACCUMULATOR 20L OLAER CH430 /CS430 919.0173-00 VALVE ASSY /PORT ASM H3000 CH430 /CS430 930.5714-00 COUPLING HALF D25 05-32-116 CH430 /CS430 930.5715-00 COUPLING HALF D28 05-32-538 CH430 /CS430 972. 0571 -00 ELECTRIC MOTOR IEC90-4 3601 400VY CH430 /CS430 984. 0571 -00 IMMERSION HEATER 380V, 670W CH430 /CS430 984.571-00 TRANSDUCER PROBE B1N EDS250 H/S3000 CH430 /CS430 984.0607-00 IMMERSION HEATER 1640W S&H3000 CH430 /CS430 984.1008-00 FLOW SWITCH LIQUID LEVEL CH430 /CS430 847.0016-00 SMS-L ACC Washer BRB  3×17/30 CH430 /CS430 847.0016-00 SMS-L ACC Washer BRB  3×17/30 CH430 /CS430 847.0016-00 SMS-L ACC Washer BRB  3×17/30 CH430 /CS430 840.0070-00 BOLT, HEXAGONAL ISO4014-M16X60 CH430 /CS430 840.0070-00 BOLT, HEXAGONAL ISO4014-M16X60 CH430 /CS430 841.0019-00 SCREW, CAP, HEXAGON SOCKET HEAD ISO4762-M10X40-8.8-A3F CH430 /CS430 840.0634-00 BOLT ISO4014 M16X25 8.8-A3F CH430 /CS430 840.0046-00 BOLT, HEXAGONAL ISO4014-M12X35-8.8-A3F CH430 /CS430 840.0542-00 SCREW, HEXAGONAL ISO4017-M24X75-8.8-A3A CH430 /CS430 840.0542-00 SCREW, HEXAGONAL ISO4017-M24X75-8.8-A3A CH430 /CS430 847.0147-00 WASHER, PLAIN ISO7089-12-200HV-A3A CH430 /CS430 847.0147-00 WASHER, PLAIN ISO7089-12-200HV-A3A CH430 /CS430 847.0147-00 PLAIN WASHER BRB 2×13/24 CH430 /CS430 868.571-00 ROLLER BRNG 22219 E/C3 CH430 /CS430 847.0180-00 WASHER, LOCK, HELICAL SPRING, REGULAR CH430 /CS430 840.0019-00 SCREW, HEXAGONAL ISO4017-M8X12-8.8-A3A CH430 /CS430 840.0019-00 SCREW, HEXAGONAL ISO4017-M8X12-8.8-A3A CH430 /CS430 840.0571-00 SCREW, HEXAGONAL ISO4017-M8X20-8.8-A3A CH430 /CS430 840.0571-00 SCREW, HEXAGONAL ISO4017-M8X20-8.8-A3A (FOR S-MODEL) CH430 /CS430 840.0066-00 BOLT, HEXAGONAL ISO4014-M16X40-8.8-A3F CH430 /CS430 840.0068-00 SCREW, HEXAGONAL ISO4017-M16X50 CH430 /CS430 840.1063-00 SCREW, HEXAGONAL ISO4017-M16X120-8.8-A3A CH430 /CS430 840.0079-00 SCREW M6S 20X70 8.8 ISO4017 /S4800 CH430 /CS430 840.0080-00 SCREW M6S 20X80 8.8 ISO4017 CH430 /CS430 840.0720-00 SCREW, HEXAGONAL ISO4017-M36X200-8.8-A3A CH430 /CS430 841.0571-00 SCREW, CAP, HEXAGON SOCKET HEAD ISO4762-M12X40-12.9-UNPLTD CH430 /CS430 864.0080-00 DAMPER ELEMENT SAW 150A CH430 /CS430 855.5713-00 REXIHU (WEST LAKE) DIS. RING EXTERNAL DIN471-SgA80X2.5 CH430 /CS430 855.5713-00 REXIHU (WEST LAKE) DIS. RING EXTERNAL DIN471-SgA80X2.5 CH430 /CS430 841.0266-00 SCREW, CAP, HEXAGON SOCKET HEAD ISO4762-M12X25-8.8-A3A CH430 /CS430 845.0030-00 NUT, HEXAGONAL, TORQUE ISO7040-M12-8-A3A CH430 /CS430 845.5716-00 NYLOCK M24 CH430 /CS430 841.0026-00 SCREW, CAP, HEXAGON SOCKET HEAD ISO4762-M12X60-12.9-UNPLTD CH430 /CS430 840.1034-00 SCREW, HEXAGONAL ISO4017-M16X60-10.9-A3A CH430 /CS430 840.0069-00 SCREW ISO4017-M16X55 CH430 /CS430 442.8247-01 CONCAVE MC 14MNCR CH430 CH430 /CS430 442.9759-01 MANTLE HC 14MNCR CH430 CH430 /CS430 442.7988-01 MANTLE A 14MNCR CH430 CH430 /CS430 442.8249-01 CONCAVE EC 14MNCR CH430 CH430 /CS430 442.8249-03 CONCAVE EC 21MNCR CH430 CH430 /CS430 442.8248-01 CONCAVE C 14MNCR CH430 CH430 /CS430 442.8470-01 MANTLE A 14MNCR CS430 CH430 /CS430 442.8470-02 MANTLE A 18MNCR CS430 CH430 /CS430 442.8477-00 CONCAVE RING LOWER EC 14MNCR CS430 CH430 /CS430 442.8484-90 CONCAVE SEGMENT UPPER EC 18MNCR CS430 CH430 /CS430 442.7984-01 SPIDER ARM SHIELD 14MNCR H3000 CH430 /CS430 442.8478-00 CONCAVE RING LOWER C 14MNCR CS430 CH430 /CS430 442.8246-01 CONCAVE M 14MNCR CH430 CH430 /CS430 452.1216-001 CONCAVE MF 14MNCR CH430 CH430 /CS430 442.7915-01/452.6564-001 PINIONSHAFT ARMLNR 14MNCR H/S3000 CH430 /CS430 442.7914-01/452.6563-001 NARROW ARM LINER 14MNCR H/S3000 CH430 /CS430 442.8251-01 CONCAVE F 14MNCR CH430 CH430 /CS430 442.8485-90 CONCAVE SEGMENT UPPER C 18MNCR CS430 CH430 /CS430 442.7989-01 MANTLE B 14MNCR CH430 CH430 /CS430 442.9035-01 RIM LINER XT610 1of 6 14MNCR /S3000 CH430 /CS430 442.8630-01 CONCAVE EF 14MNCR CH430 CH430 /CS430 442.8630-03 CONCAVE EF 21MNCR CH430 CH430 /CS430 442.8451-01 SPIDER ARM SHIELD OLD STYLE 14MNCR /S3000 CH430 /CS430 452.1502-001 MANTLE EF 14MNCR CH430 CH430 /CS430 452.1502-003 MANTLE EF 21MNCR CH430 CH430 /CS430 442.8471-01 MANTLE B 14MNCR CS430 CH430 /CS430 452.5714-901 CONCAVE SEGMENT UPPER MC 14MNCR CS430 CH430 /CS430 452.1465-001 CONCAVE SEGMENT UPPER MC 14MNCR CS430 CH430 /CS430 N/A MANTLE LIFTING TOOL CH430 /CS430 442.7989-03 MANTLE B 21MNCR CH430 CH430 /CS430 442.8246-03 CONCAVE M 21MNCR CH430 CH430 /CS430 442.8248-03 CONCAVE C 21MNCR CH430 CH430 /CS430 452.1954-902 CONCAVE RING LOWER C STEPPED 2 18MNCR CS430 CH430 /CS430 442.8251-03 CONCAVE F 21MNCR CH430 CH430 /CS430 452.1465-002 CONCAVE SEGMENT UPPER MC 18MNCR CS430 CH430 /CS430 452.1216-003 CONCAVE MF 21MNCR CH430 CH430 /CS430 442.7988-02 MANTLE A 18MNCR CH430 CH430 /CS430 442.8246-02 CONCAVE M 18MNCR CH430 CH430 /CS430 442.8484-00 CONCAVE SEGMENT UPPER EC 14MNCR CS430 CH430 /CS430 442.8247-02 CONCAVE MC 18MNCR CH430 CH430 /CS430 442.8251-02 CONCAVE F 18MNCR CH430 CH430 /CS430 442.7989-02 MANTLE B 18MNCR CH430 CH430 /CS430 442.8630-02 CONCAVE EF 18MNCR CH430 CH430 /CS430 442.9759-02 MANTLE HC 18MNCR CH430 CH430 /CS430 442.8477-90 CONCAVE RING LOWER EC 18MNCR CS430 CH430 /CS430 442.8471-02 MANTLE B 18MNCR CS430 CH430 /CS430 442.8249-02 CONCAVE EC 18MNCR CH430 CH430 /CS430 442.8248-02 CONCAVE C 18MNCR CH430 CH430 /CS430 442.8478-90 CONCAVE RING LOWER C 18MNCR CS430 CH430 /CS430 442.8485-00 CONCAVE SEGMENT UPPER C 14MNCR CS430 CH430 /CS430 452.1216-002 CONCAVE MF 18MNCR CH430 CH430 /CS430 442.9759-03 MANTLE HC 21MNCR CH430 CH430 /CS430 442.8247-03 CONCAVE MC 21MNCR CH430 CH430 /CS430 442.7988-03 MANTLE A 21MNCR CH430 CH430 /CS430 442.8470-03 MANTLE A 21MNCR CS430 CH430 /CS430 442.8478-91 CONCAVE RING LOWER C 21MNCR CS430 CH430 /CS430 840.571-00 SCREW, HEXAGONAL ISO4017-M8X25-8.8-A3A CH430 /CS430 840.0670-00 SCREW, HEXAGONAL ISO4017-M24X80-8.8-A3A CH430 /CS430 840.1156-00 SCREW, HEXAGONAL ISO4017-M12X35-10.9-UNPLTD CH430 /CS430 845.0009-00 NUT, HEXAGONAL ISO4032-M16-8-A3A CH430 /CS430 847.0132-00 WASHER BRB  3×21/36 CH430 /CS430 847.0132-00 WASHER BRB  3×21/36 CH430 /CS430 831.0016-00 BACKING COMPOUND (10 KG) CH430 /CS430 442.7802-00 GEAR SET H/S3000 CH430 /CS430 442.9668-00 PISTON TPE  H/S3000 CH430 /CS430 442.7892-01 CYL BUSHING H/S3000 CH430 /CS430 442.7893-01 PISTON WEARING PLATE CH430 /CS430 442.7894-01 STEP WASHER CH430 /CS430 442.7895-01 MAIN SHAFT STEP CH430 /CS430 442.7896-01 MPS CLAMP PLATE /H3000 CH430 /CS430 442.7897-00 CHEVRON PACKING CH430 /CS430 442.7902-01 MAIN SHAFT H3000 / USE ASSY N11851875 CH430 /CS430 442.7908-00 BOTTOM SHELL BARE H3000 CH430 /CS430 442.7910-01 HEAD H3000 / USE ASSY N11851875 CH430 /CS430 442.7913-01 MAIN SHAFT SLEEVE CH430 /CS430 442.7918-01 HEAD NUT INNER CH430 /CS430 442.7921-01 ECCENTRIC /H3000 CH430 /CS430 442.7923-01 / 452.4191-001 ECCENTRIC BUSHING 16+19+22 CH430 /CS430 442.7924-01 / 452.4192-001 ECCENTRIC BUSHING 22+25+29 CH430 /CS430 442.7925-01 / 452.4193-001 ECCENTRIC BUSHING 29+32+34+36 CH430 /CS430 442.7926-01 HUB H/S3000 CH430 /CS430 442.7927-01/452.4188-001 ECCENTRIC WEARING PLATE /H3000 CH430 /CS430 442.7928/452.4194-01 SUPPORT BAR H/S3000 CH430 /CS430 442.7929-01 DUST COLLAR CH430 /CS430 442.7930-01 SEAL RING INNER H/S3000 CH430 /CS430 442.7931-01 SEAL RING INNER   H/S3000 CH430 /CS430 442.7932-01 SUPPORT RING H3000 CH430 /CS430 442.7933-01 SHIM T=0,1   H/S3000 CH430 /CS430 442.7933-02 SHIM T=0,3  H/S3000 CH430 /CS430 442.7933-03 SHIM T=0.5  H/S3000 CH430 /CS430 442.7933-04 SHIM T=0,7   H/S3000 CH430 /CS430 442.7934-01 GASKET T= 0,8  H/S3000 CH430 /CS430 442.7935-01/452.4190-001 BOTTOM SHELL BUSHING /H3000 CH430 /CS430 442.7949-01 PINION SHAFT HOUSING H/S3000 CH430 /CS430 442.7950-01 BRNG COVER OUTER  H/S3000 CH430 /CS430 442.7951-01 BRNG COVER INNER   H/S3000 CH430 /CS430 442.7953-01 GASKET T= 0,5  H/S3000 CH430 /CS430 442.7953-02 GASKET T= 0,8   H/S3000 CH430 /CS430 442.7953-03 GASKET T= 1,5  H/S3000 CH430 /CS430 442.7954-01 SPACER RING H/S3000 CH430 /CS430 442.7954-01 SPACER RING H/S3000 CH430 /CS430 442.7955-01 WASHER /H3000 CH430 /CS430 442.7956-01 GASKET T= 0,5  H/S3000 CH430 /CS430 442.7956-02 GASKET T= 0,8  H/S3000 CH430 /CS430 442.7957-01 GASKET T= 0,5  H/S3000 CH430 /CS430 442.7958-01 MAGNETIC PLUG CH430 /CS430 442.7959-01 PLUG CH430 /CS430 BG01116636/442.7976-01 SPIDER CAP /H3000 CH430 /CS430 442.7981-00 TOP SHELL EC2 H3000 CH430 /CS430 442.7996-01 SLEEVE /H3000 CH430 /CS430 442.7997-01 WASHER /H3000 CH430 /CS430 442.7999-01 KNOB /H3000 CH430 /CS430 442.8001-01 SCREW M6S 24X360   /H3000 CH430 /CS430 442.8008-01 FILLER RING M, F, MF H3000 CH430 /CS430 442.8009-01 RING CH430 /CS430 442.8571-01 O-RING H3000 CH430 /CS430 442.8011-01 KEY 40X22X50 H3000 CH430 /CS430 442.8017-01 DUST SEAL RING CH430 /CS430 442.8571-01 RETAINER RING DUST SEAL H/S3000 CH430 /CS430 442.8571-01 RETAINER SCRAPER H/S3000 CH430 /CS430 442.8571-01 SCRAPER /H3000 CH430 /CS430 442.8245-01 FILLER RING C H3000 CH430 /CS430 442.8312-90/442.9962-901 PINION SHAFT HOUSING ASSY CH430 /CS430 442.8447-01 MAIN SHAFT S3000 / USE ASSY N11851879 CH430 /CS430 442.8448-01 HEAD S3000 / USE ASSY N11851879 CH430 /CS430 442.8449-01 ECCENTRIC TPE /S3000 CH430 /CS430 442.8486-01/452.4516-001 ECCENTRIC BUSHING 16+20+25+30 / S3000 CH430 /CS430 442.8520-00 SPIDER CAP /S3000 CH430 /CS430 442.8695-01 WEAR RING CH430 /CS430 442.9529-02 BOLT M36X90 H3000 CH430 /CS430 442.9667-00 CYLINDER COVER CH430 /CS430 442.7912-00 HEAD NUT WITH RING CH430 /CS430 442.7889-01 MPS CYLINDER HOUSING CH430 /CS430 442.8446-01 TOP SHELL EC2 S3000 CH430 /CS430 442.9936-01 PINION SHAFT H/S3000 CH430 /CS430 442.8783-01 PLUG CH430 /CS430 442.8506-01 BRACKET (FOR S-MODEL) CH430 /CS430 442.7201-00 COVER CH430 /CS430 442.9608-01 /857.571-00 KEY 18x11x200 /H3000 CH430 /CS430 442.9780-01 MOUNTING PLATE LOWER ¬†/H3000 CH430 /CS430 442.9779-00 MOUNTING PLATE UPPER ¬†/ H3000 CH430 /CS430 442.8870-00 BOTTOM SHELL WEAR LINER ASSEMBLY CH430 /CS430 442.8923-AD MAIN SHAFT ASSEMBLY H3000 CH430 /CS430 442.8937-AD/452.0655-901 MAIN SHAFT ASSEMBLY S3000 CH430 /CS430 442.6473-MNBR SPIDER BUSHING MN-BR CH430 /CS430 452.6109-001 TOP SHELL EC2 S3000/CS430 CH430 /CS430 BG05715626 TAPERED MAINSHAFT SLEEVE CH/S 430 !BLOCK U.S.! CH430 /CS430 N/A SPIDER BUSHING STD + FASTENING PARTS KIT CH430 /CS430 BG05719459 STEP BEARING SET (2260/2280/4075) LAPPED CH430 /CS430 442.8316-00 FILLER RING ASSEMBLY M (MF, F) CH430 /CS430 442.7911-01 BURNING RING H/S3000 CH430 /CS430 845.5711-00 NUT ISO4032-M36-8-TZN CH430 /CS430 847.0012-00 WASHER, PLAIN ISO7089-8-200HV-TZN CH430 /CS430 847.0012-00 WASHER, PLAIN ISO7089-8-200HV-TZN CH430 /CS430 847.0060-00 WASHER, PLAIN SMS1466-17X42X8-ST-FZB


Company Profile

HangZhou CZPT Machinery Co., Ltd, located in HangZhou of northern China, is a global provider of process solutions for a variety of industries including mineral processing, aggregate processing, coal mining, etc. It is a manufacturing company of machinery and parts specially for mineral and aggregate processing.
HangZhou CZPT Machinery Co., Ltd is committed to designing, manufacturing and maintaining cone crusher, jaw crusher, impact crusher, feeder, screen and washing equipment, and it’s also a great resource of premium replacement parts for  HP Series cone crusher, GP Series cone crusher, MP Series cone crusher, C Series jaw crusher, Symons cone crusher, Gyradisc cone crusher, Omnicone cone crusher, CH/CS cone crusher, etc. CZPT has large stock of parts for the leading models of crushers to meet the specific needs of each customer.

Powerups upholds the highest standards for engineering and manufacturing to incorporate all the advanced technology in the designs of our crushers, feeders, screens, washers, etc. In addition, it is able to design and manufacture complete crushing plant, portable crushing plant. Besides, the company operates with its own highly qualified management team to continuously improve the quality of casting, machining process, parts inspection in order to provide long wear life.
Powerups’ process equipment and systems are proven in mining operation, with installation in over 20 countries around the world including United States of America, Canada, Chile, Peru, Colombia, Mexico, Greece, Russia, Turkey, Australia, New Zealand, Saudi Arabia, Thailand, Indonesia, Cambodia, Malaysia, Vietnam, etc. CZPT is ideally positioned to deliver high quality and competitive solutions to projects anywhere in the world.

Our Mission:  Let’s Make Things Better


After-sales Service: on-Line Support for Life
Warranty: 12-Month Warranty
Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
Surface Treatment: Spray-Paint
Manufacturing Process: Casting


Customized Request

Shaft Collar

Common Uses for the Shaft Collar

The shaft collar is a relatively simple machine component, but one of the most important in many power transmission applications. It is most often used in gearboxes and motors, where it serves as a locating component, bearing face, and mechanical stop. Its simple design allows for easy installation and makes it ideal for a range of applications. Listed below are some of the most common uses for the shaft collar. Learn more about this important machine component.

Single split

Two-piece shaft collars are an excellent option for applications where a single piece collar is not practical. They provide the same benefits as one-piece collars, but with more convenience when installing. The two-piece collar has a clamp style, which allows the collar to be adjusted with a hand tool. They are suitable for light-duty applications and come in a variety of diameters. In addition to shaft diameters, collars are available with different threaded bore sizes. Shaft diameters are usually measured in mm. They can be easily installed and disassembled by removing the cap screws from each side.
Single split shaft collars come with a machine screw that tightens the clamp around the shaft. This ensures a tight, secure fit and better holding power than solid collars. They are easy to install, remove, and adjust, and work on virtually all types of shafts. The machine screw helps to prevent the collar from ripping the shaft.
Shaft collars come in a variety of materials. Typical materials include stainless steel, alloyed steel, and nylon. They are also available in custom sizes. If you want a specific size, be sure to specify that when ordering. These collars are made of quality materials, and they will hold up to the most rigorous applications.
Heavy duty shaft collars are manufactured from higher-grade materials than standard collars. They have a larger outer diameter, wider flange, and a larger screw for increased holding power. These collars are typically used in short-term, rigid coupling applications, and they are available in one-piece and two-piece clamp styles. These collars are typically made from 1215 lead-free steel or 303 stainless steel. Some of them can be finished with an anodized finish.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. There are three different styles of mountable shaft collars: flange collars, flat collars, and quick-release collars. The material used for shaft collars can be 1215 lead-free steel with a black oxide finish, high-strength aluminum, and 303 stainless steel.


A solid shaft collar is a shaft coupling that is used to connect two shafts. They can be made of a variety of materials, including steel, zinc plated, and stainless steel. In addition, they come with various finishing options, including a zinc plated or black oxide finish. In addition, they can be made to fit a variety of shaft sizes and types.
Shaft collars are a simple, yet essential part of machine design. They can be found in virtually any piece of machinery. They can serve a variety of functions, including holding bearings on shafts, positioning components within motor assemblies, and acting as mechanical stops. While they can serve a variety of functions, they are most commonly used as bearing faces, mechanical stops, and locating components. They are also easy to install and tighten, making them a popular choice for a variety of different applications.
Solid shaft collars are available in two types: one-piece and two-piece. The two-piece collars are generally more rigid, offering better clamping force. However, they require more seating torque than the one-piece clamp collar. This is because there are more screws to tighten the two-piece collar than the single-piece collar.
One type of solid shaft collar is the set screw collar. Its holding power comes from the set screw, which is tightened onto the shaft. Ideally, the set screw should impinge on the shaft, and bite into it. The screw should be made of a softer material, as a harder material would reduce its holding power. However, the set screw collar can be adjusted by milling small flats into the shaft at the locations of the set screw.
A solid shaft collar is a simple machine component used in various power transmission applications. The most common places where it is used include motors, gearboxes, and bearings. Their simple design makes it easy to install and maintain. Unlike early versions, however, which were primarily made of square-headed set screws, modern shaft collars feature recessed set screws.
Shaft Collar


A Clamping-style shaft collar is an essential component of a gearbox or motor. Its high holding power allows it to hold components securely in place and ensure proper power transmission. These collars are also commonly used as spacers or to limit the movement of shafts during reciprocating motion.
These collars come in a variety of styles, including the double-split and semi-split varieties. They are ideal for repetitive positioning and are available in steel and stainless steel. They also feature a quick release element. And the index lever makes them easy to adjust or repair.
There are several different styles of shaft collars, including the Clamping-style shaft collar. The Clamping-style collar is one of the most commonly used in industrial settings. Its clamp is attached to the shaft by screws and has a hinge on one side. This feature eliminates the risk of the screws becoming dislodged while operating the machine.
Clamping-style shaft collars are generally made of steel or stainless steel. They can be made of aluminium, but this material has lower holding power. Stainless steel collars are a good choice for cleanroom environments because they do not outgas. They also require less maintenance. If you’re uncertain which style to choose, consult with a specialist in your field.
Clamping-style shaft collars are commonly used on industrial machinery and are an important part of gearbox maintenance. If you’re planning to install one, make sure you measure it carefully before you install it. If you don’t, you may damage the shaft or endcap. And while you’re at it, be sure to check for any kinks before you use it.
Shaft Collar

Set screw

Set screw shaft collars are the most cost-effective type of shaft collar. Available in bore sizes ranging from 3/16″ to 4″, they offer increased holding power and torque capacity. Additionally, they come with a keyway in case the shafts are keyed. Commercially produced shaft collars are non-magnetic and made of 303 stainless steel. They also come with one set screw per collar.
Shaft collars can be made of aluminum, steel, or a combination of steel. They serve multiple purposes including mechanical stops and stroke limiters, and can be adjusted for the correct fit. They are easy to install and remove, and they provide high clamping power. Custom designs are also available. They can be made of different materials to suit your specific needs.
Set screw for shaft collars are commonly used in transmission and machinery applications. Set screw shaft collars can be adjusted using a screw driver. When tightened, the set screw bites into the shaft material and holds it in place. When used properly, they can reduce the amount of torque required to hold components in place.
Shaft collars come in a variety of sizes. In general, shaft collars can range from 5/64″ to one inch in diameter. In addition, you can choose between metric and inch-sized shaft collars. When choosing a shaft collar, it is important to consider the size and bore diameter of the shaft.
China supplier CH430 Cone Crusher Spider Bushing 442.6473   eccentric collar shaft lockChina supplier CH430 Cone Crusher Spider Bushing 442.6473   eccentric collar shaft lock
editor by CX 2023-11-24