Product Description
FGY Customized High Temperature Vertical Long Shaft Pump for Industry and Mining
Product Description
Conform to design standard of API610
Flow range:2~1600m3/h
Lift range:~100m
Design pressure: 5MPa at most
Application temperature:550ºC/850ºC
Application field: Transport all kinds of high temperature medium such as high temperature melted salt, high temperature melted slag, liquid lead and aluminum etc. Mainly used in high temperature medium delivery and heat transfer conditions such as nuclear power, solar power, chlor-alkali chemical industry, phthalic anhydride, maleicanhydride, acrylic acid, fluorine chemical industry, cryogen, aluminum oxide, melamine and organic chemical industry.
General
Next pump in liquid in fusil hydrochloric in series heat in FGY type,is RY my factory to produce at many year in the type fusil hydrochloric pump foundation according to the demand of the customer,consult abroad of the same kind type product of The construction proceeds the RY type that develop the design promotes to higher grade to change the on behalf product.
The series of FGY than act for the product RY type fusil hydrochloric pump product line more perfect.The dervice lifte is more long,combining to transport from the single the salt of fusil,then converting in to divided by the fusil hydrochloric Salt outside,can be used as at the same time the heat chemical engineering material transport.
The series of FGY considers to spread the cooling that move the part well on the design,transporting Lying the saturated steam in quality seals complletely to wait the work circumstances term,makinng to the original RY type pump construction A flood of improvement and pass to experiment the proceeding verification:
1.The bearinngs part establishes the cooling device,making bearinngs work environment not summit to and high the temperature lies the influence of the quality.
2.Cool off the water to get in touch with stalk directly,lie the heat of the quality can t spread because of stalk pass to turn to move the part.
3.Special construction,insure cooling water absoluteness not enter to lie the quality.
4.Need not to maintain to bear the heat seal completely the device,makinng is transported to lie the quality satisfied Divert unlikely with the steam,(special at work circumstances that transport the meltdown salt,even the saturated steam in a little amount and second nitrate also is harmful to the human bydy,cancer-causing.)
The variety bears the heat and bear the corrosion bears the combination that whet the material,makinng next pump in FGY series heat liquid been applicable to not only such as:film type method CZPT alkali,the organism fluorin break lies 2 dollars,three dollar a heat for of the fusil hydrochloric,and also can use in phosphate fertilizer,petroleum break solution etc.Device fluid of the usage transports.Because eradicating completely thoroughly the calories spreads to spread to move the part,for this reason FGY series pump than the next pump(fusil hydrochloric pump)in liquid in heat in type of the same kind life span increases consumedly.
Meaning of model code
B-Material code number 37-Head(m)Y-upright pump G-heat 100-Capacitym3/h
Chart
| 1 | Water absorption section | 2 | Pump body sealing gasket | 3 | Interstage bushings | 4 | Bushing | 5 | Pump body sealing gasket | 6 | Interstage bushings |
| 7 | Bushing | 8 | To take over the sealing gasket | 9 | Under the takeover | 10 | Intermediate shaft sleeve | 11 | To take over the sealing gasket | 12 | Middle bushing |
| 13 | On taking over | 14 | Pressurized water period | 15 | Transmission components | 16 | Coupling | 17 | Impeller | 18 | Pump body |
| 19 | Impeller | 20 | Pump body | 21 | Packing collar | 22 | Blades | 23 | Bearing | 24 | Bearing |
| 25 | Electric frame | 26 | Motor |
| 1 | Motor | 2 | Electric coupling | 3 | Electric frame | 4 | Pump coupling | 5 | Bearing gland | 6 | Round nut |
| 7 | On the bearing | 8 | Bearing box | 9 | Bearing box | 10 | Pump shaft | 11 | Bearing | 12 | Bearing gland |
| 13 | Middle frame | 14 | Blades | 15 | Packing gland | 16 | Packing 12×12 | 17 | And a half of the flange | Floor | |
| 19 | On taking over | 20 | Liquid pipe | 21 | Pump cover | 22 | Impeller | 23 | Impeller nut | 24 | Pump body |
| 25 | bushing | 26 | Under the collar | 27 | Bushing clamp | 28 | Under the takeover | 29 | Xihu (West Lake) Dis. bearing body | 30 | On the liner |
| 31 | On the collar |
Product Parameters
Performance parameters of the table
Company Profile
FAQ
| Max.Head: | ~100m |
|---|---|
| Max.Capacity: | 2~1600m3/H |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Working Pressure: | High Pressure Pump |
| Influent Type of Impeller: | Single Suction Pump |
| Customization: |
Available
| Customized Request |
|---|
Common Uses for the Shaft Collar
The shaft collar is a relatively simple machine component, but one of the most important in many power transmission applications. It is most often used in gearboxes and motors, where it serves as a locating component, bearing face, and mechanical stop. Its simple design allows for easy installation and makes it ideal for a range of applications. Listed below are some of the most common uses for the shaft collar. Learn more about this important machine component.
Single split
Two-piece shaft collars are an excellent option for applications where a single piece collar is not practical. They provide the same benefits as one-piece collars, but with more convenience when installing. The two-piece collar has a clamp style, which allows the collar to be adjusted with a hand tool. They are suitable for light-duty applications and come in a variety of diameters. In addition to shaft diameters, collars are available with different threaded bore sizes. Shaft diameters are usually measured in mm. They can be easily installed and disassembled by removing the cap screws from each side.
Single split shaft collars come with a machine screw that tightens the clamp around the shaft. This ensures a tight, secure fit and better holding power than solid collars. They are easy to install, remove, and adjust, and work on virtually all types of shafts. The machine screw helps to prevent the collar from ripping the shaft.
Shaft collars come in a variety of materials. Typical materials include stainless steel, alloyed steel, and nylon. They are also available in custom sizes. If you want a specific size, be sure to specify that when ordering. These collars are made of quality materials, and they will hold up to the most rigorous applications.
Heavy duty shaft collars are manufactured from higher-grade materials than standard collars. They have a larger outer diameter, wider flange, and a larger screw for increased holding power. These collars are typically used in short-term, rigid coupling applications, and they are available in one-piece and two-piece clamp styles. These collars are typically made from 1215 lead-free steel or 303 stainless steel. Some of them can be finished with an anodized finish.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. There are three different styles of mountable shaft collars: flange collars, flat collars, and quick-release collars. The material used for shaft collars can be 1215 lead-free steel with a black oxide finish, high-strength aluminum, and 303 stainless steel.
Solid
A solid shaft collar is a shaft coupling that is used to connect two shafts. They can be made of a variety of materials, including steel, zinc plated, and stainless steel. In addition, they come with various finishing options, including a zinc plated or black oxide finish. In addition, they can be made to fit a variety of shaft sizes and types.
Shaft collars are a simple, yet essential part of machine design. They can be found in virtually any piece of machinery. They can serve a variety of functions, including holding bearings on shafts, positioning components within motor assemblies, and acting as mechanical stops. While they can serve a variety of functions, they are most commonly used as bearing faces, mechanical stops, and locating components. They are also easy to install and tighten, making them a popular choice for a variety of different applications.
Solid shaft collars are available in two types: one-piece and two-piece. The two-piece collars are generally more rigid, offering better clamping force. However, they require more seating torque than the one-piece clamp collar. This is because there are more screws to tighten the two-piece collar than the single-piece collar.
One type of solid shaft collar is the set screw collar. Its holding power comes from the set screw, which is tightened onto the shaft. Ideally, the set screw should impinge on the shaft, and bite into it. The screw should be made of a softer material, as a harder material would reduce its holding power. However, the set screw collar can be adjusted by milling small flats into the shaft at the locations of the set screw.
A solid shaft collar is a simple machine component used in various power transmission applications. The most common places where it is used include motors, gearboxes, and bearings. Their simple design makes it easy to install and maintain. Unlike early versions, however, which were primarily made of square-headed set screws, modern shaft collars feature recessed set screws.
lamping-style
A Clamping-style shaft collar is an essential component of a gearbox or motor. Its high holding power allows it to hold components securely in place and ensure proper power transmission. These collars are also commonly used as spacers or to limit the movement of shafts during reciprocating motion.
These collars come in a variety of styles, including the double-split and semi-split varieties. They are ideal for repetitive positioning and are available in steel and stainless steel. They also feature a quick release element. And the index lever makes them easy to adjust or repair.
There are several different styles of shaft collars, including the Clamping-style shaft collar. The Clamping-style collar is one of the most commonly used in industrial settings. Its clamp is attached to the shaft by screws and has a hinge on one side. This feature eliminates the risk of the screws becoming dislodged while operating the machine.
Clamping-style shaft collars are generally made of steel or stainless steel. They can be made of aluminium, but this material has lower holding power. Stainless steel collars are a good choice for cleanroom environments because they do not outgas. They also require less maintenance. If you’re uncertain which style to choose, consult with a specialist in your field.
Clamping-style shaft collars are commonly used on industrial machinery and are an important part of gearbox maintenance. If you’re planning to install one, make sure you measure it carefully before you install it. If you don’t, you may damage the shaft or endcap. And while you’re at it, be sure to check for any kinks before you use it.
Set screw
Set screw shaft collars are the most cost-effective type of shaft collar. Available in bore sizes ranging from 3/16″ to 4″, they offer increased holding power and torque capacity. Additionally, they come with a keyway in case the shafts are keyed. Commercially produced shaft collars are non-magnetic and made of 303 stainless steel. They also come with one set screw per collar.
Shaft collars can be made of aluminum, steel, or a combination of steel. They serve multiple purposes including mechanical stops and stroke limiters, and can be adjusted for the correct fit. They are easy to install and remove, and they provide high clamping power. Custom designs are also available. They can be made of different materials to suit your specific needs.
Set screw for shaft collars are commonly used in transmission and machinery applications. Set screw shaft collars can be adjusted using a screw driver. When tightened, the set screw bites into the shaft material and holds it in place. When used properly, they can reduce the amount of torque required to hold components in place.
Shaft collars come in a variety of sizes. In general, shaft collars can range from 5/64″ to one inch in diameter. In addition, you can choose between metric and inch-sized shaft collars. When choosing a shaft collar, it is important to consider the size and bore diameter of the shaft.
editor by CX 2023-11-08