Tag Archives: pulley parts

China Mighty Auto Parts Motor Shaft Cast Iron Taper Bushing for V-Belt Pulley Timing Pulley Chain Sprockets Couplings Wed-on Hubs Taper Lock Bush Factory Price shaft collar with flange

Merchandise Description

Mighty Vehicle Parts Motor Shaft Cast Iron Taper Bushing for V-Belt pulley Timing Pulley Chain Sprockets Couplings Wed-on Hubs Taper Lock Bush Manufacturing unit Price

Product Description

Dimensions

one. Product title: Taper bushing

two. Material: Forged iron stainless steel,

three Weight: Is dependent on the item

four. Kind: taper bush 
 

Bushing Series

1, ZheJiang , P.R.China
Tel: -571-8673-6779 Fax: -28-8675-5074    
  
 

To Be Negotiated 50 Pieces
(Min. Order)

###

Standard: ANSI, En
Material: Cast Iron
Connection: for Taper Bore
Surface Treatment: Phosphide
Head Type: for Taper Bore
Certification: ISO9001:2015

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bushing Series

1008, 1108, 1210, 1215, 1310, 1610, 1615,

2012, 2017, 2517, 2525,

3020, 3030, 3525, 3535,

4030, 4040, 4535, 4545,

5040, 5050

Range of application  V-Belt pulley ,Timing Pulley, Chain Sprockets, Flexible Couplings ,HRC Couplings, Wed-on Hubs

###

Taper Bush specification Taper Bush inner bore specification
1008   10. 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25.
1108   10. 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25. 28.
1210 1212 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32.
1310   14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32. 35.
1610 1615 14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42.
2012 2017 18. 19. 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50.
2517 2525 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50. 55. 60.
3020 3030 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50. 55. 60. 65. 70. 75.
3525 3535 35. 38. 40. 42. 45. 48. 50. 55. 60. 65. 70. 75. 80. 85. 90.
4030 4040 40. 42. 45. 48. 50. 55. 60. 65. 70. 75. 80. 85. 90. 95. 100.
4535 4545 55. 60. 65. 70. 75. 80. 85. 90. 95. 100.105. 110.
5040 5050 60. 65. 70. 75. 80. 85. 90. 95. 100 . 105. 110. 115 . 120. 125.

###

Packaging
                      
    Packing  

 

We use standard export wooden case, carton and pallet, but we can also pack it as per your special requirements.
To Be Negotiated 50 Pieces
(Min. Order)

###

Standard: ANSI, En
Material: Cast Iron
Connection: for Taper Bore
Surface Treatment: Phosphide
Head Type: for Taper Bore
Certification: ISO9001:2015

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bushing Series

1008, 1108, 1210, 1215, 1310, 1610, 1615,

2012, 2017, 2517, 2525,

3020, 3030, 3525, 3535,

4030, 4040, 4535, 4545,

5040, 5050

Range of application  V-Belt pulley ,Timing Pulley, Chain Sprockets, Flexible Couplings ,HRC Couplings, Wed-on Hubs

###

Taper Bush specification Taper Bush inner bore specification
1008   10. 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25.
1108   10. 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25. 28.
1210 1212 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32.
1310   14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32. 35.
1610 1615 14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42.
2012 2017 18. 19. 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50.
2517 2525 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50. 55. 60.
3020 3030 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50. 55. 60. 65. 70. 75.
3525 3535 35. 38. 40. 42. 45. 48. 50. 55. 60. 65. 70. 75. 80. 85. 90.
4030 4040 40. 42. 45. 48. 50. 55. 60. 65. 70. 75. 80. 85. 90. 95. 100.
4535 4545 55. 60. 65. 70. 75. 80. 85. 90. 95. 100.105. 110.
5040 5050 60. 65. 70. 75. 80. 85. 90. 95. 100 . 105. 110. 115 . 120. 125.

###

Packaging
                      
    Packing  

 

We use standard export wooden case, carton and pallet, but we can also pack it as per your special requirements.

Common Uses for the Shaft Collar

The shaft collar is a relatively simple machine component, but one of the most important in many power transmission applications. It is most often used in gearboxes and motors, where it serves as a locating component, bearing face, and mechanical stop. Its simple design allows for easy installation and makes it ideal for a range of applications. Listed below are some of the most common uses for the shaft collar. Learn more about this important machine component.

Single split

Two-piece shaft collars are an excellent option for applications where a single piece collar is not practical. They provide the same benefits as one-piece collars, but with more convenience when installing. The two-piece collar has a clamp style, which allows the collar to be adjusted with a hand tool. They are suitable for light-duty applications and come in a variety of diameters. In addition to shaft diameters, collars are available with different threaded bore sizes. Shaft diameters are usually measured in mm. They can be easily installed and disassembled by removing the cap screws from each side.
Single split shaft collars come with a machine screw that tightens the clamp around the shaft. This ensures a tight, secure fit and better holding power than solid collars. They are easy to install, remove, and adjust, and work on virtually all types of shafts. The machine screw helps to prevent the collar from ripping the shaft.
Shaft collars come in a variety of materials. Typical materials include stainless steel, alloyed steel, and nylon. They are also available in custom sizes. If you want a specific size, be sure to specify that when ordering. These collars are made of quality materials, and they will hold up to the most rigorous applications.
Heavy duty shaft collars are manufactured from higher-grade materials than standard collars. They have a larger outer diameter, wider flange, and a larger screw for increased holding power. These collars are typically used in short-term, rigid coupling applications, and they are available in one-piece and two-piece clamp styles. These collars are typically made from 1215 lead-free steel or 303 stainless steel. Some of them can be finished with an anodized finish.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. There are three different styles of mountable shaft collars: flange collars, flat collars, and quick-release collars. The material used for shaft collars can be 1215 lead-free steel with a black oxide finish, high-strength aluminum, and 303 stainless steel.
Shaft Collar

Solid

A solid shaft collar is a shaft coupling that is used to connect two shafts. They can be made of a variety of materials, including steel, zinc plated, and stainless steel. In addition, they come with various finishing options, including a zinc plated or black oxide finish. In addition, they can be made to fit a variety of shaft sizes and types.
Shaft collars are a simple, yet essential part of machine design. They can be found in virtually any piece of machinery. They can serve a variety of functions, including holding bearings on shafts, positioning components within motor assemblies, and acting as mechanical stops. While they can serve a variety of functions, they are most commonly used as bearing faces, mechanical stops, and locating components. They are also easy to install and tighten, making them a popular choice for a variety of different applications.
Solid shaft collars are available in two types: one-piece and two-piece. The two-piece collars are generally more rigid, offering better clamping force. However, they require more seating torque than the one-piece clamp collar. This is because there are more screws to tighten the two-piece collar than the single-piece collar.
One type of solid shaft collar is the set screw collar. Its holding power comes from the set screw, which is tightened onto the shaft. Ideally, the set screw should impinge on the shaft, and bite into it. The screw should be made of a softer material, as a harder material would reduce its holding power. However, the set screw collar can be adjusted by milling small flats into the shaft at the locations of the set screw.
A solid shaft collar is a simple machine component used in various power transmission applications. The most common places where it is used include motors, gearboxes, and bearings. Their simple design makes it easy to install and maintain. Unlike early versions, however, which were primarily made of square-headed set screws, modern shaft collars feature recessed set screws.
Shaft Collar

lamping-style

A Clamping-style shaft collar is an essential component of a gearbox or motor. Its high holding power allows it to hold components securely in place and ensure proper power transmission. These collars are also commonly used as spacers or to limit the movement of shafts during reciprocating motion.
These collars come in a variety of styles, including the double-split and semi-split varieties. They are ideal for repetitive positioning and are available in steel and stainless steel. They also feature a quick release element. And the index lever makes them easy to adjust or repair.
There are several different styles of shaft collars, including the Clamping-style shaft collar. The Clamping-style collar is one of the most commonly used in industrial settings. Its clamp is attached to the shaft by screws and has a hinge on one side. This feature eliminates the risk of the screws becoming dislodged while operating the machine.
Clamping-style shaft collars are generally made of steel or stainless steel. They can be made of aluminium, but this material has lower holding power. Stainless steel collars are a good choice for cleanroom environments because they do not outgas. They also require less maintenance. If you’re uncertain which style to choose, consult with a specialist in your field.
Clamping-style shaft collars are commonly used on industrial machinery and are an important part of gearbox maintenance. If you’re planning to install one, make sure you measure it carefully before you install it. If you don’t, you may damage the shaft or endcap. And while you’re at it, be sure to check for any kinks before you use it.
Shaft Collar

Set screw

Set screw shaft collars are the most cost-effective type of shaft collar. Available in bore sizes ranging from 3/16″ to 4″, they offer increased holding power and torque capacity. Additionally, they come with a keyway in case the shafts are keyed. Commercially produced shaft collars are non-magnetic and made of 303 stainless steel. They also come with one set screw per collar.
Shaft collars can be made of aluminum, steel, or a combination of steel. They serve multiple purposes including mechanical stops and stroke limiters, and can be adjusted for the correct fit. They are easy to install and remove, and they provide high clamping power. Custom designs are also available. They can be made of different materials to suit your specific needs.
Set screw for shaft collars are commonly used in transmission and machinery applications. Set screw shaft collars can be adjusted using a screw driver. When tightened, the set screw bites into the shaft material and holds it in place. When used properly, they can reduce the amount of torque required to hold components in place.
Shaft collars come in a variety of sizes. In general, shaft collars can range from 5/64″ to one inch in diameter. In addition, you can choose between metric and inch-sized shaft collars. When choosing a shaft collar, it is important to consider the size and bore diameter of the shaft.
China Mighty Auto Parts Motor Shaft Cast Iron Taper Bushing for V-Belt Pulley Timing Pulley Chain Sprockets Couplings Wed-on Hubs Taper Lock Bush Factory Price     shaft collar with flangeChina Mighty Auto Parts Motor Shaft Cast Iron Taper Bushing for V-Belt Pulley Timing Pulley Chain Sprockets Couplings Wed-on Hubs Taper Lock Bush Factory Price     shaft collar with flange
editor by czh 2023-01-23

Cnfulo best made in China – replacement parts – in Hanoi Viet Nam Timing Belt for Timing Belt Pulley with top quality

Cnfulo  best  made in China - replacement parts -  in Hanoi Viet Nam  Timing Belt for Timing Belt Pulley with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 different branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

  Firm Details

Founded in 1984, EPT addresses forty five,000 square meters with more than 350 personnel. As a national high-tech organization now, we passed ISO9001, TS16949. With national lab(NASA) and municipal innovation heart, we set more than 10 countrywide and buying and selling standards. What is much more, once-a-year output is much more than 10 million pieces of belts and 600 thousand pieces of pulleys. Matched belts and pulleys make sure the lifestyle-span of items longe

 Size

Sort Pitch Pb(mm) Tooth height ht(mm) Belt thickness hs(mm) Angle β° Details
MXL 2.032 .fifty one 1.fourteen forty Specifics
XXL 3.one hundred seventy five .76 1.fifty two fifty Specifics
XL 5.080 one.27 2.30 50 Information
L 9.525 1.91 three.sixty forty Details
H twelve.70 two.29 4.30 40 Specifics
XH 22.225 six.35 eleven.twenty 40 Specifics
XXH 31.750 nine.53 15.70 forty Specifics
T2.five 2.5 .7 1.30 forty Information
T5 5 one.twenty 2.twenty 40 Specifics
T10 10 two.fifty four.fifty forty Details
T20 twenty 5.00 8.00 forty Particulars
AT5 five one.20 2.70 fifty Particulars
AT10 10 two.fifty five.00 fifty Particulars
AT20 twenty five.00 nine.00 fifty Details

TE EPT Area:
 

WORKSHOP:

Office:

 

Speak to information :

Acle Luo

Mobil:0086~13083988828 13858117778566060705

Business Title: HangZhou fulong synchronous belt co., ltd

Incorporate: Xihu (We EPT Lake) Dis.n Town CIci Metropolis HangZhou ZHangZhoug China(Mainland)

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For much more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first products manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our business and the outlined substitute parts contained herein are not sponsored, accepted, or created by the OEM.

Cnfulo  best  made in China - replacement parts -  in Hanoi Viet Nam  Timing Belt for Timing Belt Pulley with top quality

Cnfulo  best  made in China - replacement parts -  in Hanoi Viet Nam  Timing Belt for Timing Belt Pulley with top quality

YAMAHA200 shop made in China – replacement parts – in Lahore Pakistan Motorcycle Driving Pulley Motorcycle Parts with top quality

YAMAHA200  shop  made in China - replacement parts -  in Lahore Pakistan  Motorcycle Driving Pulley Motorcycle Parts with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

YAMAHA200 motorbike add-ons motorcycle driving pulley variator set!
We can make with your samples and specifications!
Our motorcycle entrance pulley,made by certified substance,has been exported to a lot of diverse consumers and nations.we can also offer accessories for entrance pulley wheel driving,like roller and variation components etc.

Information
Model for YAMAHA200
Package LPI package
Trademark LPI
OEM/Not OEM EPT available

More motorbike elements we can supply!

 

EPT components we can source
Engine components Cylinder head,Cylinder package(Piston),Valve established,Arm rocker,Chain set(big sprocket,tiny sprocket,chain),Bearing,Clutch assy(clutch gear,clutch plates,clutch cover),Drive plate assy(weighing rollers,ace driven),Transmission assy( transmission belt,transmission,kick shaft,change lever),Carburetor
Electrical areas Stator,Stater motor,Ignition coil,Rectifier,CDI,Lock established(lock,cap)
Frame areas Brake shoes,Brake disk,Barke pump assy,Fr&Re hub,Front hub iron,Rim,Brake pads,Rubber damper,Speedometer gear,Gas cock,Speedometer,Turning light-weight,Headlight,Tail mild,Mirror,Fr&Re absorber,Horn,Cables(speedometer cable,throttle cable,brake cable),Battery,Battery
Body components Oil tank,Facet protect,Front&Rear fender,Higher handie cover,Medification front go over,Front protector include,Down include,Facet protect cap,Lnner box fairing
EPT accent Handle grips,Nuts,Glooves

 
A lot more accessible parts for: Bike,Atv,Pocket bike,Dirtbike etc

HONDA CG125 CG150 CG200 GY650(sixty eighty ninety one hundred a hundred twenty five 150) C70 C90 C100 C110 CUB90 WAVE100 WAVE110 WS110 WAVE125 CB125 CB150 SH125 SH150 TMX125 XRM125 WH125
YAMAHA 3KJ50 BWS MBK YB50 2JA JOG50 CRYPTON110 XC125 Y110 RX115 JY110 YBR125 MAJESTY250 CYGNUS X125 MIO NOUVO JUPITER-MX RXS115
SUZUKI GN125 GN150 AX100 GS125 AD50 AG50 HJ125 SMASH110
KAWASAKI BC175 KRISS BAJAJ-CT100 BAJAJ-CNG125
ITALIKA CS125, DS125, XS125/one hundred fifty, DS150, GS150, WS150, ST70, STRADA70, ST90, AT110, ARGENTA110, FT110/125/one hundred fifty, XT110, FORZA150
BAJAJ BOXER CT100, PULSAR135/one hundred fifty/a hundred and eighty/200, DISCOVER125/135, PLATINO100/a hundred twenty five

About TTP:
TTP Power Growth(HangZhou) CO.,L EPT was launched in 2001s,which is liable for the perform relevant to assembly factories,mend outlets and after-sales solutions. We mainly engaged in high-high quality motorcycle spare areas exportation. With fantastic brand name LPI,RACING BEE,TTP exports huge quantity each and every year to European countries,South American nations,Center Ea EPT nations around the world and Southea EPT Asia countries,and many others. We provide various legitimate areas for different motorcycle models,motorbike engine assembly,motorcycle motor areas,motorcycle physique elements,motorbike equipment,also parts for POCKET Bike,ATV,SCCOTER. With very types of selection areas,our clients fond of producing extended term corporation replationship with us.
The merchandise are in substantial high quality,gorgeous style and sensible price,with assistance of innovating R&D,the organization always focuses on quality of goods and providers for each and every important buyer and tends to make it as its complete lifestyle objective.

 

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique equipment manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our organization and the outlined substitute elements contained herein are not sponsored, authorized, or manufactured by the OEM.

YAMAHA200  shop  made in China - replacement parts -  in Lahore Pakistan  Motorcycle Driving Pulley Motorcycle Parts with top quality

YAMAHA200  shop  made in China - replacement parts -  in Lahore Pakistan  Motorcycle Driving Pulley Motorcycle Parts with top quality

Wire near me shop made in China – replacement parts – in Odesa Ukraine Rope Steel Pulley Block Manual Pulley with top quality

Wire  near me shop  made in China - replacement parts -  in Odesa Ukraine  Rope Steel Pulley Block  Manual Pulley with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Crane Pulley is the important too EPT for hoisting. It has simple structure and easy to use. It can change direction of pulley, steel wire rope and high weight cargoes, especially series of pulley combined with windlass, ma EPT and EPT lifting machinery. It widely used in installation and construction. Its item from 0.03T to 320T, and whee EPT not exceed ten. Our lifting too EPT including hooks, chain lifting ri
Ng and handing beam, you can choose one according to your need.
Specifications
Made of high quality casting steel and carbon steel, closed type, easy handling
1. Crane pulley block with eight sheave, shackle head
2. Material:
Sheave: Casting steel
Shackle: 45# carbon steel
Plate: 235# carbon steel
3. Working load limite: 160 ton
4. Suitable wire rope: 31 mm
5. Weight: 1137.4 kg
6. Packing: Nylon or gunny cloth
7. MOQ: 500 pieces
8. Payment terms: T/T & sight L/C
9. Delivery: Within 28 days after we get some deposit
Specifications
1. Used to change the direction of a rope with a ca EPT steel sheave.
2. Manufactured in accordance with European Standard EN 13157: 2003, and the machinery Directive 98/37/EC
3. One side of the pulley blocks is hinged and can be opened for easy and quick positioning of the rope on the sheave.
4. Swinging the hook in the direction of pull securely locks the block.
5. The sheaves are high quality ca EPT steel and have machined grooves.
Features:
Capacity form 0.5t to 5t
Single sheave and double sheave are available
Side opening link permits quick, easy insertion of rope or cable without threading
Shackle forged to ensure the quality, nodular ca EPT iron wheel.
2 times te EPT load and 4 times break load.
 

Name 
 
Model  Capacity Te EPT Load  Wire rope Diameter(mm)  Sheave Diameter  Weight
t     kn Apply  Max mm kg
Single sheave  pulley block TW(L)KI-0.5 0.5 8 6.2 7.7 71 1.75
TW(L)KI-1 1 16 7.7 11 85 3.25
TW(L)KI-2 2 32 11 14 112 6
TW(L)KI-3.2 3.2 51.2 12.5 15.5 132 10.5
TW(L)KI-5 5 80 15.5 18.5 160 19
TW(L)KI-8 8 128 20 23 210 35.2
TW(L)KI-10 10 160 23 24.5 240 50.5
TW(L)KI-16 16 224 28 31 315 113.5
TW(L)KI-20 20 280 31 35 355

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Wire  near me shop  made in China - replacement parts -  in Odesa Ukraine  Rope Steel Pulley Block  Manual Pulley with top quality

Wire  near me shop  made in China - replacement parts -  in Odesa Ukraine  Rope Steel Pulley Block  Manual Pulley with top quality

Stainless made in China – replacement parts – in Denpasar Indonesia Steel 3D Printer Filament Extruder Pulley Gear Drive Gear with M4 Hexagonal Screw with ce certificate top quality low price

Stainless  made in China - replacement parts -  in Denpasar Indonesia  Steel 3D Printer Filament Extruder Pulley Gear Drive Gear with M4 Hexagonal Screw with ce certificate top quality low price

Stainless  made in China - replacement parts -  in Denpasar Indonesia  Steel 3D Printer Filament Extruder Pulley Gear Drive Gear with M4 Hexagonal Screw with ce certificate top quality low price

We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing facility in China with 5 diverse branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

stainless steel 3D Printer Filament Extruder Pulley Gear generate equipment with M4 hexagonal Screw   

Surface: As your prerequisite
Content: Metal / aluminum / brass / iron / zinc / alloy
Any EPT content and dimension depends on customers’ desire.

Utilization: EPT / furniture / toy / woodboard / wall
Euipment: CNC device
Testing tools: Projector

 

Substance Stainless steel, copper, brass, carbon steel, aluminum (according to customer’s requirement.
Surface Treatment Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the heat disposing, 
very hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated, blue black zinc-plated, rust preventive oil, 
titanium alloy galvanized, silver plating, plastic, electroplating, anodizing etc.
Main Products Precision screw,bolt, nuts,fastener,knob,pins, bushing, sleeve,equipment, stamping parts,washer,gasket,plastic molding 
injection parts,standoff,CNC machining service,accessories etc.
Producing Equipment CNC machine , automatic lathe machine,stamping machine,CNC milling machine,rolling machine,lasering,tag grinding machine etc.
Management System  ISO9001 – 2008 
Available Certificate RoHS, SGS, Material Certification
Testing Equipment Projecting apparatus, Salt Spray Test, Durometer, and Coating thickness tester , 2D projector
Lead time 10-15 working days as usual,It will based on the detailed order quantity.
Managing Returned Goods With quality problem or deviation from drawings
Delivery of Samples By DHL,Fedex,UPS, TNT,EMS^^
Guarantee Replacement at all our cost for rejected products
Main Markets North America, South America, Eastern Europe , West Europe , North Europe, South Europe, Asia
How to order * You send us drawing or sample
* We carry through project assessment
* We give you our design for your confirmation
* We make the sample and send it to you after you confirmed our design
* You confirm the sample then place an order and pay us 30% deposit
* We start producing
* When the goods is done, you pay us the balance after you confirmed pictures or tracking numbers.
* Trade is done, thank you!!
Programs Toy,Automotive, instrument, electrical equipment, household appliances, furniture, mechanical equipment, daily living equipment, 
electronic sports equipment, light industry products, sanitation machinery, market/ hotel equipment supplies, artware etc.

 

The use of first tools manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our business and the shown substitute areas contained herein are not sponsored, authorized, or created by the OEM.

Stainless  made in China - replacement parts -  in Denpasar Indonesia  Steel 3D Printer Filament Extruder Pulley Gear Drive Gear with M4 Hexagonal Screw with ce certificate top quality low price

Stainless  made in China - replacement parts -  in Denpasar Indonesia  Steel 3D Printer Filament Extruder Pulley Gear Drive Gear with M4 Hexagonal Screw with ce certificate top quality low price

Stainless  made in China - replacement parts -  in Denpasar Indonesia  Steel 3D Printer Filament Extruder Pulley Gear Drive Gear with M4 Hexagonal Screw with ce certificate top quality low price

High shop made in China – replacement parts – in Ikorodu Nigeria Quality Aluminium 3D Printer Parts 2gt Timing Belt Pulley 16 Tooth 15mm with top quality

High  shop  made in China - replacement parts -  in Ikorodu Nigeria  Quality Aluminium 3D Printer Parts 2gt Timing Belt Pulley 16 Tooth 15mm with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Product Description

Product Type

XL, H, HTD8M,5M,3M, AT3, AT5 standard gear, or according customer drawing to make.

Material:

Carbon Steel, Brass, Aluminium, Stainless steel, Plastic, POM, Delrin, Titanium Alloy etc.

Process method

CNC Turning, hobbing gear

Surface finish:

Chrome plating, Anodization, Powder coating, blackening, Sand blasting, Brushing & ploshing,Electrophoresis etc.

OEM & ODM Service

Available

Design Software

PRO/E, Auto CAD, Solid Works 

Trade Terms:

FOB,,CIF,EXW

Payment Terms:

T/T, L/C, 

Packing:

 Foam, Carton, Standard Wooden boxes

Capacity

8,000~1,5000 pcs per month

Delivery 

20-30 days after receiving PO

Applications

Automotive Parts,hydraulics, compressors,Industrial equipments, transmission parts, etc.

Our services:

CNC Machining, Milling, Stamping, Sheet metal fabricating, and Die-Casting

Product show

  

Manufacture process

FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special reque EPT about packing, p EPT negotiate with us in advance, we can pack the goods as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance. EPT payments terms, p EPT negotiate with us in advance, we can discuss.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample co EPT and 
the courier cost.We welcome sample order.

Q7. Do you te EPT all your goods before delivery?
A: Yes, we have 100% te EPT before delivery

Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

High  shop  made in China - replacement parts -  in Ikorodu Nigeria  Quality Aluminium 3D Printer Parts 2gt Timing Belt Pulley 16 Tooth 15mm with top quality

High  shop  made in China - replacement parts -  in Ikorodu Nigeria  Quality Aluminium 3D Printer Parts 2gt Timing Belt Pulley 16 Tooth 15mm with top quality